The Stag 10S .308 Bones Rifle is a high quality, durable, large frame AR rifle that is ready for you to customize to your liking.
This model features a .308 chambered 16” 1/10 twist chrome lined or Nitride barrel, 6 position receiver extension tube, VG6 Gamma 762 and a Manganese Phosphate or Black Nitride coated BCG.
Every complete AR10 rifle from Stag Arms comes with a Transferable Lifetime Warranty, an Infinite Shot Barrel Guarantee and a magazine.
This rifle uses a DPMS High Profile, tang height of .210, allowing it to match with the most common DPMS handguards. It will also accept any AR15 Mil-Spec Stock.
Federal law requires this product to be transferred through a licensed FFL dealer. Stag Arms requires a copy of the dealer's FFL for verification. It's the customer's responsibility to notify the dealer of the order.
Weight: 6.4 pounds
Tang Height: .210
Action: Semi-auto direct impingement
Caliber: .308 Winchester | 7.62x51
Twist Rate: 1/10 button rifled
Muzzle Device: VG6 Gamma 762
Barrel: 16", 4150 steel, Black Nitride or Phosphate Finish
Receiver Material: Forged 7075 T6 aluminum with type 3 hard coat anodizing. Upper features a .210 Tang Height (DPMS High Profile)
Bolt Carrier: .308 Nitride QPQ BCG
Charging Handle: Standard
Hammer/Trigger pin size: Mil-spec small pin .154"
Pivot/Takedown Pin Size: .2770"
Buttstock: None/6 position receiver extension tube
Gas System: Low Profile Gas Block with Mid-Length Gas System
Buffer: .308 carbine
Trigger: Mil-spec single stage trigger with a non-adjustable 5-8 lb trigger pull
Magazine: 10rd PMAG
Safety Selector: Right or Left Hand
Q: What is the warranty coverage for this rifle?
A: All of our rifles have a transferable lifetime warranty.
Q: Will the components of this rifle work with other manufacturers?
A: There are only 5 pieces on this rifle that are not compatible with either DPMS or AR15 components. Those pieces are the stripped upper, stripped lower, takedown pin, pivot pin, and takedown pin detent.